3

Evidence Today: Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
Jim MacIntosh

4

In order to build a dam, firm bedrock exposures in the banks were necessary. In this case the bedrock was only on one side of the brook.

5

Hand-fitted Stones, Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
Jim MacIntosh

6

Where necessary a 'dry' stone wall was constructed, with boulders carefully placed so they did not wash away in the spring flood waters. This was built on the south side of the brook, on the Swan property, where there were no suitable natural outcrops.

7

Dam logs, Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
Jim MacIntosh

8

Timber was readily available for the construction of a dam; these had to withstand a considerable force of water in the spring when the large snowfalls of winter, melted. Careful searching only revealed one or two logs from the original dam, where they had become trapped in the bank.

9

Downstream, Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
Barbara Baird

10

In July the water in the brook was still fast flowing, but by August the volume will have decreased; a dam would have helped regulate the flow. Once a dam was constructed, the build-up of water supplied various mills; this could be a problem as some mills lower down the water-course might find themselves short of water if too much had been diverted by another mill owner.

11

The Flume, Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
J. MacIntosh

12

Remains of the former equipment used in the mill area are still apparent. Rusting and scattered as they were probably caught up in spring floods, they litter the valley floor. Part of the former flume, carrying water from the dam to the mill is about 30 inches (75 cm) across.

13

Turbine With Fins Inside, Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
J. MacIntosh

14

These two pictures are the remains of the turbine. This turbine continued to run until 1935, when the mill burned down. Amongst the undergrowth are other metal objects, including old saws, iron rods and bars.

15

Fins Inside Turbine, Alex Swan Family Mill Site, New Annan, Nova Scotia, Canada
13 August 2010
New Annan, Nova Scotia, Canada
TEXT ATTACHMENT


Credits:
J. MacIntosh

16

A nostalgic reminder of the past is one of the millstones, lying in the adjoining field, and fast becoming hidden by grass and weeds. Another millstone from this site is supposed to be at the Balmoral Gristmill Museum.

Along the top of the valley sides are many large sugar maple trees, from the time when the Swans had a small maple syrup industry (See 'Service Industries').